Thhncu-generic thhn2strgrymr Thhn 2 Awg Stranded Copper Wire

Product Description

The THHNCU-GENERIC thhn2strgrymr is a 2 AWG stranded copper THHN building wire sold in cut-to-length increments. The conductor is made from copper with a 19-strand configuration, covered in gray PVC thermoplastic insulation and a nylon jacket rated for use at 600 volts. Temperature ratings extend to 90 degrees C in dry environments, making it suitable for branch circuit and feeder wiring in conduit. Electricians use this wire in residential, commercial, and light industrial applications where NEC-compliant wiring methods are required.

This wire is appropriate for general-purpose branch circuits and feeder runs installed inside conduit or raceway systems. Cut-to-length availability reduces material waste on jobs where standard spool lengths exceed actual project needs. The gray insulation color supports color-coded wiring installations and phase identification in multi-conductor conduit runs. Licensed electricians and electrical contractors are the primary installers for this type of conductor in new construction, renovation, and service upgrade work.

Key Features

• 2 AWG copper conductor with 19-strand configuration for flexibility in conduit pulls
• Gray PVC thermoplastic insulation with nylon jacket for abrasion resistance
• Rated 600 volts for branch circuit and feeder applications
• Current capacity of 95 amps at 60 degrees C, 115 amps at 75 degrees C, and 130 amps at 90 degrees C
• 90 degrees C dry temperature rating meets common NEC installation requirements
• Cut-to-length format reduces material waste on custom-length runs

Compatibility

Designed for use in conduit and raceway systems as a general-purpose THHN building wire for branch circuit and feeder wiring in residential, commercial, and light industrial applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 310 and applicable local codes. De-energize all circuits at the panel before pulling or terminating conductors. THHN wire is rated for use inside conduit or raceways and is not approved for direct burial or wet locations without additional protection. Use a properly sized wire pulling lubricant when routing through conduit to avoid damaging the insulation jacket.