Techniseal 141000100 Polymeric Jointing Sand 35 Lb Tan

Product Description

The TECHNISEAL 141000100 is a polymer-fortified jointing sand engineered for filling the joints between paving stones, concrete pavers, and segmental retaining wall units. The sand-and-additive blend activates with moisture, hardening in place to lock joint material firmly against displacement. Once cured, it resists washing out from rain, resists displacement from freeze-thaw cycles and substrate movement, and holds its position under wind exposure. The 141000100 comes in a tan color and is packaged in a 35-pound pail. Landscape contractors, hardscape installers, and experienced property maintenance crews are the primary installers of this product.

This product is suited for residential and light commercial hardscape applications including paver patios, walkways, driveways, and pool decks where joint stability is critical. It is specifically formulated for joints approximately 1/4 inch wide and 2 inches deep. At that joint dimension, a 40-pound pail covers roughly 30 to 45 square feet, so coverage from this 35-pound pail will vary accordingly. Coverage also changes with joint depth and paver thickness, so always calculate joint volume before estimating quantity needed.

Key Features

• Polymer-fortified blend hardens with moisture to lock sand in paving joints
• Resists washout from rain, freeze-thaw cycling, and substrate movement
• Inhibits weed germination and growth in treated joints
• Resists insect penetration into joint spaces
• Tan color suitable for natural stone and concrete paver aesthetics
• Best applied with a funnel or sand bag to place material directly into joints

Compatibility

Designed for use with paving stone joints approximately 1/4 inch wide and 2 inches deep in residential and light commercial hardscape installations. Consult the product label for joint dimension limits before use on atypical paver configurations.

Installation Notes

Installation is typically performed by licensed landscapers or hardscape contractors following manufacturer surface-prep guidelines. Before wetting, sweep all excess sand completely off the paver surface to prevent surface staining once water is applied. Apply water gently to activate the polymer binder without displacing sand from the joints. Allow adequate cure time before opening the surface to foot or vehicle traffic.