Tech Products 52842 Housed Spring Leveling Mount 115 Lb

Product Description

The TECH PRODUCTS 52842 is a housed spring leveling mount designed to isolate vibration and provide leveling adjustment for mechanical equipment. The unit features a 115-pound load capacity and a maximum deflection of 1.31 inches, making it suitable for light- to medium-duty isolation applications. The enclosed housing protects the spring element from debris and physical damage, extending service life in demanding environments. HVAC technicians, mechanical contractors, and equipment installers use this type of mount when setting compressors, air handlers, fans, and similar vibrating machinery on floors or structural supports.

This mount is appropriate for residential and light commercial HVAC and mechanical installations where spring isolation is required under equipment bases. The 2-5/8-inch overall width and 9/16-inch mounting hole diameter suit standard equipment base rail configurations. A 1/2-13 bolt thread size allows straightforward connection to equipment frames or inertia bases. The 3.5-inch thread length provides sufficient adjustment range for leveling on uneven surfaces.

Key Features

• 115-pound load capacity per mount for light- to medium-duty vibration isolation
• 1.31-inch maximum deflection for effective spring isolation
• Enclosed housing protects spring element from damage and contaminants
• 1/2-13 bolt thread size for standard mechanical compatibility
• 9/16-inch mounting hole diameter fits common equipment base rail configurations
• 3.5-inch thread length allows leveling adjustment on uneven mounting surfaces

Compatibility

Designed as an OEM-style spring isolation mount for use under mechanical equipment bases in residential and light commercial HVAC and mechanical systems where housed spring leveling mounts with a 115-pound load rating and 1/2-13 bolt thread are specified.

Installation Notes

Installation is typically performed by licensed HVAC technicians or mechanical contractors. Disconnect and lock out all power to the equipment before repositioning or mounting. Ensure the mounting surface is structurally adequate to support the combined equipment and mount load. Distribute mounts evenly under the equipment base and adjust thread engagement uniformly to level the unit and achieve proper spring compression.