Tech Products 52813 Housed Spring Leveling Mount 100 Lb

Product Description

The TECH PRODUCTS 52813 is a housed spring leveling mount designed to isolate vibration and provide adjustable leveling support for mechanical equipment. The spring element absorbs dynamic loads while the housing protects the assembly and provides a stable base. With a 100 lb load capacity and a maximum deflection of 1.33 inches, this mount suits light-to-medium duty applications where vibration transmission to a floor or frame must be minimized. The 3/8-16 bolt thread and 7/16 inch mounting hole allow straightforward attachment to equipment bases. HVAC technicians, millwrights, and mechanical contractors install this type of mount during equipment placement and commissioning.

This leveling mount is suited for use with rooftop units, air handlers, pumps, fans, compressors, and similar vibration-generating mechanical equipment in both residential and light commercial settings. The housed design protects the spring from debris and physical damage in exposed or semi-exposed installations. At 2.25 inches wide and 5.75 inches in length, the mount fits standard equipment base rail configurations. The 3/8-16 bolt thread is a common size that works with most OEM equipment mounting hardware without modification.

Key Features

• 100 lb load capacity per mount for light-to-medium duty vibration isolation
• Maximum deflection of 1.33 inches for effective spring travel under load
• 3/8-16 bolt thread size compatible with standard equipment base hardware
• 7/16 inch mounting hole diameter for direct fastening to equipment frames
• Housed design shields the spring element from physical damage and debris
• Compact footprint at 2.25 inches wide and 5.75 inches in length

Compatibility

Designed as an OEM-style replacement or new-installation vibration isolation mount for mechanical equipment requiring a housed spring leveling mount with a 3/8-16 bolt thread and 100 lb load capacity.

Installation Notes

Installation is typically performed by licensed HVAC technicians or mechanical contractors during equipment placement or scheduled maintenance. De-energize and lock out all electrical circuits to the equipment before positioning or adjusting mounts. Ensure the mounting surface is level and structurally adequate to support the distributed equipment load across all mount points. Verify that the total number of mounts used provides sufficient combined load capacity for the full equipment weight before returning the system to service.