Tech Products 52544 Leveling Mount 1100 Lb 1/2-13 Thread

Product Description

The TECH PRODUCTS 52544 is a standard deflection leveling mount designed to isolate vibration and provide stable, adjustable support for mechanical equipment. Built with a steel stud and neoprene pad, it absorbs dynamic loads while allowing fine height adjustment during installation. The mount carries a static load capacity of 1,100 pounds and accepts a 1/2-13 bolt thread. With an overall width of 3.375 inches and a base diameter of 2.5 inches, it fits a wide range of equipment footprints. Licensed HVAC techs, millwrights, and mechanical contractors install these mounts on rooftop units, air handlers, compressors, pumps, and similar rotating or reciprocating equipment.

This leveling mount suits residential and light commercial mechanical installations where equipment must be leveled on uneven surfaces or where vibration transmission to the structure must be reduced. Typical applications include rooftop HVAC unit bases, chiller pads, pump skids, and compressor mounting frames. The neoprene pad provides a static deflection of up to 0.25 inches, making it suitable for equipment with low-frequency vibration profiles. The 9/16-inch mounting hole diameter accommodates standard anchor bolt configurations used across most equipment bases.

Key Features

• 1,100 lb static load capacity per mount
• 1/2-13 threaded steel stud for height adjustment and secure fastening
• Neoprene pad provides up to 0.25 inches maximum deflection for vibration isolation
• 2.5-inch base diameter with 9/16-inch mounting hole for standard anchor bolt fitment
• 3.375-inch overall width distributes load across a broad footprint
• Steel stud construction for durability under continuous mechanical load

Compatibility

Designed as an OEM-style leveling and vibration-isolation mount for residential and commercial mechanical equipment including HVAC units, pumps, compressors, and similar base-mounted machinery requiring a 1/2-13 thread interface.

Installation Notes

Installation is typically performed by licensed HVAC technicians, mechanical contractors, or millwrights. De-energize and lock out all equipment before positioning or adjusting mounts. Use appropriately rated anchor hardware through the 9/16-inch mounting hole and ensure all mounts under a single piece of equipment are loaded evenly to maintain level operation. Torque fasteners to the equipment manufacturer's specifications and verify deflection is within the rated range after final load is applied.