Tech Products 52543 Leveling Mount 750 Lb 1/2-13 Thread

Product Description

The TECH PRODUCTS 52543 is a standard deflection leveling mount designed to isolate vibration and provide stable, adjustable support for mechanical equipment. The mount features a steel stud with a 1/2-13 bolt thread and a neoprene pad base that absorbs vibration and reduces noise transmission to floors and structural surfaces. Rated for a 750-pound load capacity, it suits heavy-duty installations where equipment leveling and vibration control are both required. The unit measures 3-3/8 inches in overall width and 5-1/2 inches in length, with a 2-1/2-inch base diameter and a maximum deflection of 0.25 inches. HVAC and mechanical contractors install this mount under air handlers, compressors, pumps, and similar equipment.

This leveling mount is used in commercial and residential mechanical rooms wherever rotating or reciprocating equipment requires vibration isolation at the base. Typical applications include installation under rooftop units, indoor air handling units, hydronic pumps, condensing units, and light industrial machinery. The neoprene pad material resists oil, moisture, and common HVAC chemicals encountered in mechanical service environments. The 9/16-inch mounting hole diameter accommodates standard anchor bolt patterns for concrete pad and curb applications.

Key Features

• 750-pound load capacity suitable for heavy mechanical equipment
• 1/2-13 steel stud thread for secure, adjustable height positioning
• Neoprene pad base for vibration isolation and noise reduction
• Maximum deflection of 0.25 inches under rated load
• 9/16-inch mounting hole diameter for standard anchor bolt patterns
• 2-1/2-inch base diameter with 3-3/8-inch overall width for stable footing

Compatibility

Designed as a standard OEM-style leveling and vibration isolation mount for use with mechanical equipment installations requiring a 1/2-13 threaded stud, 750-pound load rating, and neoprene isolation pad.

Installation Notes

Installation is typically performed by licensed HVAC, plumbing, or mechanical contractors during equipment setting or preventive maintenance. De-energize and lock out all equipment before positioning or adjusting mounts. Secure the mounting stud to the equipment base before anchoring the pad to the mounting surface, and verify the unit is level across all mount points before final tightening. Consult local mechanical codes for vibration isolation requirements on equipment over specified weight thresholds.