Tech Products 52222 Studded Leveling Mount 3/8-16 500 Lb

Product Description

The TECH PRODUCTS 52222 is a studded leveling mount designed to support and level heavy equipment in commercial and industrial HVAC, mechanical, and plumbing applications. The mount features a steel stud with a 3/8-16 thread and a neoprene pad bonded to a round steel base. It handles up to 500 lb of load capacity, making it well suited for rooftop units, air handlers, compressors, pumps, and similar mechanical equipment that requires stable, vibration-dampening support. Installation is straightforward and does not require special tools beyond a standard wrench sized for the 3/8-inch hex.

This leveling mount is used wherever trade professionals need to set and level equipment on uneven surfaces or equipment pads. Common applications include rooftop HVAC installations, mechanical room equipment mounting, pump and compressor bases, and any setting where controlled height adjustment and vibration isolation are required. The neoprene pad provides a degree of vibration dampening between the equipment base and the mounting surface, which helps reduce noise transmission and protects equipment over time.

Key Features

• 500 lb rated load capacity per mount
• 3/8-16 threaded steel stud for secure, adjustable engagement
• 3.125-inch diameter round base provides stable footprint
• Neoprene pad absorbs vibration and protects mounting surfaces
• 1.5-inch overall height with 3-inch stud length for leveling range
• Yellow color for easy visual identification during installation

Compatibility

Designed as a standard studded leveling mount for use with equipment bases, frames, and housings that accept a 3/8-16 threaded stud in commercial and industrial mechanical applications.

Installation Notes

Licensed HVAC technicians, pipefitters, and mechanical contractors typically install leveling mounts during equipment placement or re-leveling service calls. Always de-energize and fully support the equipment before adjusting or replacing leveling mounts. Use a wrench on the 3/8-inch hex to set mount height before locking the position. Verify that load is distributed evenly across all mount points to avoid overloading any single mount beyond its rated capacity.