Tech Products 52220 Studded Leveling Mount 3/8-16

Product Description

The TECH PRODUCTS 52220 is a studded leveling mount designed to provide stable, adjustable support for HVAC equipment, compressors, pumps, and other mechanical systems. Built with a steel stud and neoprene pad base, this mount isolates vibration while allowing precise height and leveling adjustment. The 3/8-16 threaded stud mates with standard hardware, and the 3.125-inch base diameter distributes load evenly across the mounting surface. Rated at 150 pounds load capacity, it suits a wide range of light- to medium-duty trade applications. Installed by HVAC technicians, plumbers, and mechanical contractors wherever equipment leveling and vibration control are needed.

This leveling mount is commonly used beneath condensing units, air handlers, pumps, fans, and similar mechanical equipment that requires ground-level or pad-mounted installation. The neoprene pad bottom grips the mounting surface and reduces transmitted vibration. The 3-inch steel stud length and 1.5-inch base edge height provide adequate clearance and adjustment range for typical equipment bases and mounting pads. Suitable for both residential and light commercial installations where a threaded stud mount is specified.

Key Features

• 150 lb load capacity per mount for stable support of mechanical equipment
• 3/8-16 threaded steel stud for secure, adjustable attachment
• 3.125-inch base diameter provides broad load distribution
• Neoprene pad base reduces vibration transmission to the mounting surface
• 1.5-inch base edge height and 3-inch stud length offer practical leveling range
• Steel stud construction for durability in typical trade service environments

Compatibility

Designed as a standard studded leveling mount for use with mechanical equipment requiring 3/8-16 threaded mounting hardware, including HVAC units, pumps, and light commercial mechanical systems.

Installation Notes

Installation is typically performed by HVAC technicians or mechanical contractors. Power down and de-energize all equipment before positioning or adjusting mounts. Use appropriate wrenches for the 3/8-inch hex to seat and adjust the stud securely. Verify that the combined load across all mounts does not exceed the per-mount rated capacity, and confirm the mounting surface is clean and flat before seating the neoprene pad.