Tech Products 51032 Vibration Isolator 13 Lb 8-32 Stud

Product Description

The TECH PRODUCTS 51032 is a stud-mount vibration isolator rated for a maximum load of 13 pounds. This compact round isolator uses an 8-32 stud-to-stud configuration to dampen vibration and reduce noise transfer between mounted equipment and the supporting structure. It measures 9/16 inches in diameter and 1/2 inch in height, with a thread length of 0.375 inches. HVAC technicians, equipment installers, and mechanical contractors use these isolators when securing small motors, fan assemblies, control components, and similar vibration-generating equipment to panels, brackets, or frames.

This isolator is suited for light-duty residential and commercial applications where vibration control is required at a small fastener point. Typical install scenarios include mounting small HVAC blower motors, condensate pump assemblies, electronic enclosures, and comparable components where an 8-32 threaded connection is used and load capacity stays within the 13-pound rating. The low-profile design fits tight spaces where a taller isolator would not clear adjacent components.

Key Features

• 13-pound maximum load capacity suitable for small motors and control components
• 8-32 stud-to-stud thread configuration for direct fastener-to-fastener installation
• Compact round profile at 9/16 inches diameter and 1/2 inch height
• 0.375-inch thread length for engagement in standard panel thicknesses
• Dampens vibration and reduces structure-borne noise transmission

Compatibility

Designed as an OEM-style replacement or new-install vibration isolator for any light-duty mechanical or HVAC application using an 8-32 stud mount with a load at or below 13 pounds.

Installation Notes

Installation is performed by HVAC technicians or mechanical contractors as part of equipment mounting procedures. De-energize and lock out all electrical circuits before working on or near the mounted equipment. Verify that the combined weight of the mounted component does not exceed the 13-pound load rating before securing. Follow applicable mechanical codes and equipment manufacturer guidelines for fastener engagement depth and isolator placement.