Tech Products 50928 Vibration Isolator 100 Lb Stud Plate

Product Description

The TECH PRODUCTS 50928 is a round vibration isolator designed to reduce noise and mechanical vibration transmission between equipment and mounting surfaces. It accepts a 5/16-18 stud and plate mount configuration, making it straightforward to install on HVAC equipment, compressors, fans, pumps, and similar vibration-generating components. The isolator measures 1.375 inches in diameter and 1.5 inches in height, with a thread length of 0.625 inches. It is rated for a maximum load capacity of 100 pounds. HVAC technicians, plumbers, and mechanical contractors commonly install these isolators during equipment mounting to meet noise and vibration control requirements.

This isolator is suited for light commercial and residential applications where mechanical equipment must be isolated from structural surfaces to limit vibration transfer and associated noise. Typical installations include mounting pads for air handlers, fan coil units, small compressors, pumps, and pipe support assemblies. The stud-and-plate dual mount style provides flexibility for different mounting configurations without requiring additional hardware in most installations.

Key Features

• 100 lb maximum load capacity for light-duty equipment mounting
• 5/16-18 thread size compatible with standard stud and plate mounting hardware
• Round profile at 1.375 inches diameter keeps footprint compact
• 0.625-inch thread length provides adequate engagement for secure fastening
• Dual mount type accepts both stud and plate configurations
• 1.5-inch overall height provides isolation clearance between equipment and mounting surface

Compatibility

Designed as an OEM-style replacement or new-installation vibration isolator for residential and light commercial mechanical equipment requiring a 5/16-18 stud or plate mount with up to 100 lb load capacity.

Installation Notes

Installation is typically performed by HVAC technicians or mechanical contractors during equipment mounting or scheduled maintenance. De-energize all equipment and relieve any system pressure before replacing existing isolators. Verify that the total combined load does not exceed the rated capacity per isolator mount point. Hand-tighten fasteners to seat the isolator evenly before applying final torque per the equipment manufacturer's mounting instructions.