System Sensor b300-6 Intelligent Detector Base 6 Inches

Product Description

The SYSTEM SENSOR b300-6 is a 6-inch intelligent detector base designed for use with compatible addressable fire detection systems. This mounting base provides a secure, low-profile connection point between the detection device and the wiring of the fire alarm loop. It is finished in white to suit standard commercial and residential ceiling installations. Licensed fire alarm technicians and life safety contractors typically specify and install this base as part of a complete addressable detection layout. The b300-6 is suited for applications where a larger footprint base is required to cover existing ceiling cutouts or legacy base profiles.

This detector base is used in intelligent, addressable fire alarm systems where individual device addressing and loop communication are required. The 6-inch diameter footprint makes it well suited for retrofit installations where the existing ceiling opening or previous base was larger than standard. It is commonly installed in commercial buildings, multi-family residential projects, and institutional facilities as part of a supervised fire detection network.

Key Features

• 6-inch diameter base footprint accommodates larger ceiling openings and legacy installations
• White finish blends with standard commercial and residential ceiling surfaces
• Designed for use with intelligent, addressable detection devices
• Low-profile mounting design for clean ceiling appearance
• Secure wiring termination point for addressable loop connections

Compatibility

Designed as an OEM-style replacement or supplemental base for use with compatible SYSTEM SENSOR intelligent addressable detector heads. Verify detector head model compatibility with the b300-6 before installation.

Installation Notes

Installation should be performed by a licensed fire alarm technician in accordance with NFPA 72 and all applicable local codes. Disconnect and lock out power to the fire alarm control panel and the initiating device circuit before beginning work. Ensure all wiring connections are fully seated and secured at the base terminals before mounting the detector head. Do not energize the circuit until the detector head is fully seated and the system has been tested per the authority having jurisdiction requirements.