Superior Abrasives A006927 Sanding Sheet 180 Grit

Product Description

The SUPERIOR ABRASIVES A006927 is a coated abrasive sanding sheet designed for dry finish sanding applications requiring a very fine surface cut. Built on a J-weight cloth backing, this sheet offers flexibility and conformability when working on contoured or flat surfaces. The aluminum oxide abrasive grain is bonded to the cloth substrate using a coated construction, delivering consistent scratch patterns at 180 grit. This sheet is suited for hand sanding or backing-pad use across wood, metal, and composite substrates where a very fine finish pass is needed. Tradespeople and finishing professionals reach for this grit when refining surfaces between coats or preparing for final finishing stages.

This sanding sheet is used in dry sanding applications across woodworking, light metalwork, and surface prep trades. The 180-grit rating places it in the very fine category, making it appropriate for smoothing wood grain, knocking down primer, or refining machined metal surfaces. The cloth backing makes it more durable under hand pressure than paper-backed alternatives, particularly when working around edges or irregular profiles. It is not rated for wet or waterproof use and should not be used with water, cutting fluids, or lubricants.

Key Features

• 180 grit aluminum oxide abrasive for consistent very fine material removal
• J-weight cloth backing provides flexibility for contoured and flat surface work
• Coated construction bonds abrasive grain firmly to backing for extended sheet life
• Dry-use only rated - not waterproof, not load resistant
• Suitable for wood, light metal, and composite surface finishing applications

Compatibility

Designed as a standard coated abrasive sanding sheet for use in dry hand-sanding and backing-pad applications where 180-grit very fine aluminum oxide cloth-backed sheets are specified.

Installation Notes

This sheet is installed by hand or mounted to a compatible backing pad or sanding block. Ensure the work surface is clean and dry before use, as this sheet is not rated for wet applications. Do not use with water, oils, or solvents. Inspect the sheet for wear and replace when abrasive loading or grain breakdown reduces cutting efficiency.