SUMITOMO Sumitomo 18HWW0R Grooving Insert GCMN3125GG AC520U

Sumitomo 18HWW0R Grooving Insert GCMN3125GG AC520U

Brand: SUMITOMO
SKU: 18HWW0R
Availability: In Stock

Ships same day if ordered by 12 pm

$187.10
$187.10
HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The SUMITOMO 18HWW0R is a solid carbide grooving insert in the GND series, designed for precision external and internal grooving operations on CNC turning centers and lathes. The insert carries the AC520U manufacturer grade with a PVD coating process, delivering wear resistance and edge stability across a broad range of workpiece materials. It features a 0.125-inch (3.18 mm) cutting width, a maximum depth of cut of 0.750 inches (19.05 mm), and a neutral hand orientation. The GG chip breaker geometry supports chip control during interrupted and continuous grooving cuts. Licensed machinists and CNC operators install and index this insert as part of routine tooling maintenance.

The 18HWW0R is suited for universal workpiece materials, with primary material codes K, M, P, and S covering cast iron, stainless steel, steel, and heat-resistant superalloys. It is appropriate for both light and moderate grooving applications where consistent groove width and depth control are required. The double-ended configuration extends tool life between indexing intervals. This insert fits toolholders designed for the GCMN 3125 insert seat size 3 format and is commonly used in production turning environments handling a variety of part materials.

Key Features

  • AC520U grade with PVD coating for wear resistance across multiple workpiece material classes
  • GG chip breaker geometry promotes controlled chip formation during grooving
  • Neutral hand orientation allows flexible toolholder pairing
  • Double-ended insert design provides two usable cutting edges per insert
  • 0.125-inch cutting width with a maximum depth of cut of 0.750 inches
  • Positive rake angle of 5 degrees reduces cutting forces on the workpiece

Compatibility

Designed for use with GCMN-style toolholders accepting insert seat size 3 and a 3125 insert size code. Compatible with systems conforming to ANSI and ISO 13399 standards. ANSI code GCMN3125R0.5-GG applies. Verify toolholder pocket dimensions before installation to confirm proper seating.

Installation Notes

Insert indexing and replacement should be performed by a qualified CNC machinist or toolroom technician with the machine in a full stop and locked-out state per applicable OSHA lockout/tagout procedures. Seat the insert fully into the toolholder pocket and torque the clamping screw according to the toolholder manufacturer specification. Inspect the insert seat and clamping surfaces for chips or debris before seating a new insert. Do not use a damaged or chipped insert, as asymmetric loading can cause insert fracture during cutting.

Technical Specifications
Insert Style
GCMN
Manufacturer Grade
AC520U
Series
GND
Chip Breaker
GG
Cutting Width
0.125 inches (3.18 mm)
Maximum Depth of Cut
0.750 inches (19.05 mm)
Maximum Depth of Cut Range
0.300 to 1.000 inches (10.00 to 20.00 mm)
Cutting Height
0.150 inches (3.81 mm)
Overall Length
0.831 inches
Inscribed Circle
0.831 inches (21.11 mm)
Corner Radius
0.0079 inches (0.20 mm)
Rake Angle
5 degrees (Positive)
Lead Angle
0 degrees
Insert Hand
Neutral
Single or Double End
Double
Insert Material
Solid Carbide
Coating Process
PVD
Coating Finish
Coated
Primary Workpiece Material Codes
K, M, P, S
Insert Seat Size
3
ANSI Code
GCMN3125R0.5-GG
Standards
ANSI, ISO 13399
Package Weight
0.05 pounds
Brand
SUMITOMO
Manufacturer Part Number
18HWW0R
SUMITOMO Sumitomo 18HWW0R Grooving Insert GCMN3125GG AC520U

Vendor: SUMITOMO

Sumitomo 18HWW0R Grooving Insert GCMN3125GG AC520U

$187.10

Vendor: SUMITOMO

Sumitomo 18HWW0R Grooving Insert GCMN3125GG AC520U

$187.10

Related Products

Customer Support Image

Need Support?

Call Jack and His Team