Sumitomo 14HA315 ACP200 Solid Carbide Milling Insert

Product Description

The SUMITOMO 14HA315 is a solid carbide milling insert designed for high-performance face and shoulder milling operations. Manufactured to the ACP200 grade with a PVD coating process, this insert delivers consistent cutting performance in steel applications. It features an AXMT insert style with a parallelogram shape and an 85-degree included angle, giving it a right-hand cutting orientation. The insert measures 0.6890 inches in cutting edge effective length and 0.2190 inches thick, with a corner radius of 0.0470 inches. It is installed and replaced by machinists and CNC tooling technicians during scheduled insert indexing or when edge wear is detected.

This insert is suited for milling steel workpieces where controlled chip evacuation and edge stability are required. The G chip breaker geometry supports reliable chip formation across a range of feed rates. The maximum depth of cut reaches 0.5510 inches (14.00 mm), making it appropriate for moderate to aggressive milling passes in production environments. It is compatible with the WEX3000 cutter series and is sold individually with a minimum order quantity of 10 units per purchase.

Key Features

• ACP200 manufacturer grade with PVD coating for wear resistance on steel
• AXMT insert style in a parallelogram shape with 85-degree included angle
• G chip breaker geometry for controlled chip formation
• Corner radius of 0.0470 inches for edge strength and surface finish
• Maximum depth of cut of 0.5510 inches (14.00 mm)
• Right-hand cutting orientation with 11-degree relief angle

Compatibility

Designed for use with the WEX3000 cutter series. Primary workpiece material is steel (material code P). Insert size code 1235, insert size 170512.

Installation Notes

Insert indexing and replacement should be performed by a qualified machinist or CNC tooling technician with the spindle fully stopped and the machine in a locked-out, de-energized state per applicable machine guarding and lockout/tagout procedures. Use the appropriate torque wrench and insert clamp hardware specified by the cutter body manufacturer. Inspect the pocket seating surface for debris or damage before seating the new insert. Do not exceed the cutter body manufacturer specified maximum depth of cut or feed rate for this insert size.