Steinen q.65-60-2f Oil Burner Nozzle 0.65 Gph 60 Degree

Product Description

The STEINEN q.65-60-2f is an oil burner nozzle designed to atomize fuel oil for residential and light commercial heating equipment. It delivers a flow rate of 0.65 gallons per hour (GPH) at a 60-degree spray angle, producing a finely atomized cone of fuel that promotes clean, efficient combustion. Oil burner nozzles are precision components that directly affect flame shape, combustion efficiency, and heat output. This nozzle is installed by licensed oil burner technicians during routine seasonal tune-ups, nozzle replacements, or combustion adjustments on forced-air oil furnaces and oil-fired boilers.

This nozzle is suited for residential oil-fired heating systems where a 0.65 GPH flow rate and a 60-degree spray angle are specified by the burner manufacturer or combustion analysis. The 60-degree angle produces a medium-width flame pattern, which is commonly used in retention-head burners installed in standard residential furnaces and boilers. Technicians select nozzle type, flow rate, and spray angle based on the burner model, nozzle adapter, and combustion test results to maintain proper fuel delivery and minimize soot buildup.

Key Features

• 0.65 GPH rated flow rate for precise fuel delivery in low-to-moderate BTU heating systems
• 60-degree spray angle produces a medium-width atomized fuel cone suited for retention-head burner configurations
• Designed for use with No. 1 and No. 2 fuel oil as commonly specified in residential heating applications
• Precision-machined construction maintains consistent atomization and combustion performance over the service interval
• Standard nozzle thread sizing for compatibility with common nozzle adapters used on residential oil burners

Compatibility

Designed as an OEM-style replacement nozzle for residential and light commercial oil-fired furnaces and boilers requiring a 0.65 GPH flow rate at a 60-degree spray angle. Confirm the required GPH, spray angle, and nozzle type against the burner nameplate or service manual before installation.

Installation Notes

Oil burner nozzles are installed by licensed oil burner technicians or qualified HVAC service professionals. Always shut down the burner and allow all components to cool before servicing the nozzle assembly. Use a nozzle wrench to remove and install the nozzle without stressing the nozzle adapter or fuel line connections. After replacement, perform a combustion analysis using a flue gas analyzer to verify proper CO2, oxygen, and smoke readings before returning the system to service.