Starrett 54922 Low Carbon Steel Flat Stock 24x3/4x3/16 in

Product Description

The STARRETT 54922 is a low carbon steel flat stock bar made to AISI Type C1018 material specification. It measures 24 inches long, 3/4 inch wide, and 3/16 inch thick, with tightly controlled tolerances suited to precision fabrication and toolroom work. Length tolerance is plus 0.625 inches, width tolerance is plus 0.000 to 0.005 inches, and both thickness and squareness tolerances hold to plus or minus 0.001 inches. The part ships as a single piece and is used by machinists, fabricators, millwrights, and maintenance technicians who require a predictable, machinable steel bar for fixturing, brackets, keys, and general metalwork.

C1018 low carbon steel is a standard choice for applications that require moderate strength, good machinability, and easy welding without extensive pre- or post-heat treatment. This flat bar is suited to light structural fabrication, maintenance and repair operations, and shop-made tooling components. The tight width and thickness tolerances make it a reliable starting point when close finished dimensions are required with minimal stock removal.

Key Features

• AISI Type C1018 low carbon steel — good machinability and weldability
• Thickness and squareness tolerances held to plus or minus 0.001 inches
• Width tolerance of plus 0.000 to 0.005 inches for consistent finished sizing
• Length tolerance of plus 0.625 inches provides material for facing or cutoff
• Single-piece packaging with no minimum order beyond one unit

Compatibility

Designed as a general-purpose C1018 low carbon steel flat bar for use in fabrication, maintenance, and toolroom applications where AISI C1018 material specification is required.

Installation Notes

This flat stock is a raw material bar and does not require installation in the conventional sense. Cutting, drilling, and grinding should be performed with tooling rated for low carbon steel. Standard shop safety practices apply, including eye and hand protection during machining operations. Verify final dimensions after any cutting or surface preparation before fitting to an assembly.