Starrett 15486 Welded Bandsaw Blade 4-6 Tpi Bi-metal M42

Product Description

The STARRETT 15486 is a welded bi-metal bandsaw blade engineered for continuous cutting of ferrous and non-ferrous metals in industrial and commercial shop environments. Measuring 14 feet 5 inches in length, 1 inch wide, and 0.035 inches thick, this blade is built around an M42 high-speed steel tooth material bonded to a flexible back. The variable pitch design runs at 4 to 6 teeth per inch, reducing harmonic vibration and heat buildup during cuts. A positive rake angle combined with a raker tooth set promotes aggressive, efficient chip clearance. Licensed HVAC, plumbing, and mechanical contractors as well as metal fabricators rely on this blade for structural and tubing cuts on both ferrous and non-ferrous stock.

The 15486 fits standard 14-foot 5-inch bandsaw wheel configurations commonly found in vertical metal-cutting bandsaws used in fabrication shops, mechanical rooms, and trade contractor facilities. The M42 bi-metal construction handles the full range of mild steel, stainless, aluminum, copper, and similar materials. Its straight tooth form supports contour cutting applications in addition to straight ripping and crosscutting, making it a versatile blade for multi-material shops. The Intenss series designation indicates a blade optimized for heavy-duty, high-cycle use on demanding production or service work.

Key Features

• M42 high-speed steel teeth on a flexible bi-metal back for durability and resistance to blade fatigue
• Variable pitch 4 to 6 TPI reduces vibration and extends blade life on varied cross-sections
• Raker tooth set with positive rake angle for aggressive chip clearance on metal stock
• Straight tooth form supports both contour and linear cutting passes
• Rated for ferrous and non-ferrous metal applications including structural steel, tubing, aluminum, and copper
• Factory-welded construction ensures consistent joint strength and balanced blade tracking

Compatibility

Designed to fit bandsaw machines that accept a 14-foot 5-inch blade with a 1-inch width and 0.035-inch blade thickness. Verify wheel diameter and blade guide specifications on the host machine before installation.

Installation Notes

Blade installation should be performed by a qualified operator following the bandsaw manufacturer's service procedures. Power down and lock out the machine before removing the existing blade or mounting the new one. Wear cut-resistant gloves when handling the coiled or uncoiled blade. Confirm blade tension, tracking alignment, and guide clearances are set to the machine manufacturer's specifications before resuming operation.