Starrett 10835 Welded Bandsaw Blade 8 Tpi Carbon Steel

Product Description

The STARRETT 10835 is a welded bandsaw blade engineered for continuous cutting in metal fabrication and woodworking environments. Part of the Duratec SFB series, it measures 176 inches in length and 3/4 inch in width with a blade thickness of 0.032 inches. The blade uses a constant-pitch, 8 TPI configuration with a raker tooth set and straight tooth form, making it well-suited for consistent stock removal in ferrous and non-ferrous metals, plastics, and plywood. The flexible back type reduces blade fatigue during extended cutting cycles. This blade is installed and serviced by machinists, fabricators, and maintenance technicians working with vertical or horizontal band saws.

The STARRETT 10835 is intended for contour cutting applications across a range of materials including ferrous metal, non-ferrous metal, plastic, and plywood. The 8 TPI constant pitch is effective on medium-section stock where a balance of cut speed and surface finish is required. It is a practical choice for job shops, production facilities, and maintenance departments running standard 14-inch band saw equipment that accepts a 176-inch blade loop.

Key Features

• Duratec SFB series construction with carbon steel blade and tooth material
• 176 inches overall blade length, 3/4 inch wide, 0.032 inches thick
• 8 TPI constant pitch with raker tooth set for balanced chip clearance
• Straight tooth form and straight rake angle for general-purpose cutting
• Flexible back type reduces stress and extends blade life during contour cutting
• Rated for ferrous metal, non-ferrous metal, plastic, and plywood applications

Compatibility

Designed as a welded replacement blade for band saws accepting a 176-inch blade loop, typically 14-inch frame band saws used in metal fabrication and general shop cutting applications.

Installation Notes

Band saw blade replacement should be performed by a qualified technician with the machine fully de-energized and locked out per OSHA lockout/tagout procedures. Verify wheel diameter, blade width capacity, and blade guide clearance before installing. Blade tension should be set according to the machine manufacturer's specification for the blade width and material being cut. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades.