Standard Abrasives 7010369357 Cross Buff Coarse 2 Ply

Product Description

The STANDARD ABRASIVES 7010369357 is a 2-ply cross buff abrasive wheel designed for surface finishing, blending, and light deburring on metal and other hard materials. Measuring 2 inches in diameter by 3/4 inches in width, this coarse-grade wheel features a 1/4-20 threaded hole for direct mounting on compatible threaded mandrels. It runs at a maximum speed of 12,000 RPM and is constructed with a medium-density, 2-ply cross configuration that promotes consistent abrasive contact across irregular or contoured surfaces. Machinists, fabricators, and maintenance technicians use this style of buff for rapid stock removal and surface prep in tight or hard-to-reach areas.

This cross buff is suited for bench grinder, die grinder, or drill press applications where a threaded mandrel mount is used. The coarse grade makes it appropriate for initial surface preparation, weld blending, and removal of light burrs or scale on ferrous and non-ferrous metals. Its compact 2 x 3/4 inch profile allows access to recessed areas, inside diameters, and other confined work zones that larger wheels cannot reach. It is sold individually and typically ordered in multiples of 25.

Key Features

• Coarse grade with medium density for aggressive surface preparation and blending
• 2-ply cross buff construction promotes even abrasive contact on contoured surfaces
• 1/4-20 threaded hole for secure mandrel mounting
• Rated to 12,000 RPM maximum for use with standard die grinders and drill presses
• Compact 2 inches x 3/4 inches size accesses confined or recessed work areas

Compatibility

Designed for use with 1/4-20 threaded mandrels compatible with die grinders, bench grinders, and drill press setups that accept this thread size and wheel diameter.

Installation Notes

Installation is performed by threading the buff directly onto a 1/4-20 mandrel — ensure the mandrel and spindle are rated at or above the 12,000 RPM maximum before use. Always power down and disconnect the tool from its energy source before mounting or removing the wheel. Verify that the operating speed of the tool does not exceed the rated maximum RPM of the wheel. Eye protection and appropriate PPE are required during operation per standard shop safety practices.