Spi MS160719031 Electronic Depth Gage 150mm Nist

Product Description

The SPI MS160719031 is an electronic depth gage with a measurement range of 0 to 150mm (0 to 6 inches), designed for precision depth and step measurements in machining, fabrication, and inspection environments. The gage delivers 0.02mm (0.001 inch) accuracy and 0.01mm (0.0005 inch) resolution with a linear scale embedded in the beam for consistent, repeatable readings. The 4-inch (101.60mm) base provides stable seating across bores, slots, and stepped surfaces. A built-in data output port supports SPC and USB connectivity for quality control documentation. This tool is primarily used by machinists, quality technicians, and tool-room professionals who require traceable, documented measurements.

This depth gage is suited for use in machine shops, manufacturing facilities, and quality inspection stations. The 4-inch base accommodates a wide range of bore and slot widths commonly encountered in general metalworking and precision fabrication. The included single hook expands utility for shoulder and undercut measurements. NIST traceability certification is included, making it appropriate for use in regulated inspection processes and ISO-compliant quality systems. The gage arrives calibrated and ready for immediate use with one CR2032 battery included.

Key Features

• Measurement range: 0 to 150mm (0 to 6 inches) with 0.02mm accuracy
• 0.01mm (0.0005 inch) resolution with embedded linear scale
• 4-inch (101.60mm) hardened base for stable, flat-surface seating
• SPC and USB data output for integration with quality control systems
• Includes single hook for shoulder and undercut depth measurement
• NIST traceability certification and factory calibration included
• Automatic shut-off extends CR2032 battery life

Compatibility

Designed as a general-purpose electronic depth gage for use in machine shop, tool room, and quality inspection applications requiring a 150mm range and 4-inch base.

Installation Notes

Electronic depth gages require no permanent installation and are handled as portable precision instruments. Before use, zero the gage on a known flat reference surface and verify the base is clean and free of burrs or debris that could affect seating accuracy. Avoid dropping or storing in environments with excessive moisture, as this gage carries no water resistance rating. Battery replacement uses a standard CR2032 cell; recalibration against a traceable reference is recommended after battery changes in critical inspection workflows.