Spi CMS220623083 Digital Caliper 0-40 in IP65 Carbon Fiber

Product Description

The SPI CMS220623083 is a large-range digital caliper built from carbon fiber reinforced plastic with stainless steel jaws. It measures from 0 to 40 inches (0 to 1000mm) with a resolution of 0.0005 inches (0.01mm) and an accuracy of 0.002 inches (0.05mm). The caliper features built-in wireless data output for direct transmission to compatible data collection systems, eliminating manual transcription errors. It carries an IP65 rating for dust and liquid ingress protection and ships calibrated to ASME B89.1.14 standards. Licensed metrology technicians, quality control inspectors, and precision measurement professionals are the primary users.

This caliper is suited for large-scale industrial measurement applications where both imperial and metric readings are required. The IP65 rating makes it appropriate for shop-floor environments exposed to coolant mist and fine particulate. The wireless data output integrates directly into statistical process control (SPC) workflows. Jaw length is 5.4375 inches with stainless steel construction, and the minimum inside diameter measurable is 0.7875 inches. The overall instrument length is 48.2677 inches when fully extended, requiring adequate bench or storage space for handling and transport.

Key Features

• Large measurement range: 0 to 40 inches (0 to 1000mm) in a single instrument
• Resolution of 0.0005 inches (0.01mm) with accuracy to 0.002 inches (0.05mm)
• Built-in wireless data output for SPC and quality system integration
• IP65-rated dust and liquid ingress protection for shop-floor use
• Carbon fiber reinforced plastic beam with stainless steel jaws for durability and light weight
• Ships factory-calibrated to ASME B89.1.14 standards
• Powered by one CR2032 lithium battery, included

Compatibility

Designed for use with data collection systems and SPC software that accept wireless digital caliper input. Verify wireless receiver compatibility with your existing data acquisition hardware before installation.

Installation Notes

This instrument requires no mechanical installation. Handle with care during initial setup to avoid jaw damage or beam deflection, which would affect calibration. Store in the supplied case when not in use to maintain IP65 seal integrity and protect the carbon fiber beam. Battery replacement should be performed with a non-conductive tool to avoid shorting the CR2032 cell contacts; power the unit off before swapping the battery.