Spears 54211168615 Pvc Sch 80 45 Degree Socket Elbow 2.5 in

Product Description

The SPEARS 54211168615 is a 2-1/2 inch Schedule 80/XH PVC 45-degree socket elbow rated for 150 psi non-shock service at 73 degrees F. Injection molded from PVC Type I, cell classification 12454, this fitting conforms to ASTM D1784 and meets ASTM D2467 requirements for potable water service certification through NSF International. The gray molded body delivers the wall thickness required for higher-pressure piping systems where standard Schedule 40 fittings are not adequate. Licensed plumbers and pipefitters install this fitting in pressure-rated PVC piping runs where a 45-degree directional change is needed.

This fitting is suited for residential and light commercial plumbing, irrigation, industrial process, and chemical handling systems using Schedule 80/XH PVC piping. The socket-style end connection accepts Schedule 80 PVC pipe for solvent-cement joining, making it a standard choice for dry or wet systems that require NSF-listed potable water compliance. Typical applications include water distribution, recirculation, and process lines where corrosion resistance and pressure integrity are required.

Key Features

• Schedule 80/XH wall thickness rated to 150 psi non-shock at 73 degrees F
• Injection molded PVC Type I, cell classification 12454, per ASTM D1784
• Certified for potable water service per ASTM D2467 and NSF International
• Socket end style accepts solvent-cement joining with Schedule 80 PVC pipe
• 45-degree angle provides moderate directional change without sharp-turn flow restriction
• Domestically manufactured gray PVC construction

Compatibility

Designed as an OEM-style pressure fitting for Schedule 80/XH PVC piping systems using 2-1/2 inch nominal socket connections conforming to ASTM D2467.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter following applicable IPC and local plumbing code requirements. Isolate and depressurize the line completely before cutting into any existing piping. Use a PVC-rated primer and solvent cement appropriate for Schedule 80 fittings, and allow full cure time before returning the system to pressure. Do not exceed the rated pressure or temperature limits of the fitting.

Technical Specifications

• Nominal Size: 2-1/2 inches
• Pressure Rating: 150 psi (non-shock at 73 degrees F)
• Temperature Rating: 73 degrees F
• Schedule Rating: SCH 80/XH
• End Style: Socket
• Fitting Type: 45 Degree Elbow
• Material: PVC Type I, Cell Classification 12454
• Method of Manufacture: Molded
• Color: Gray
• Standards: ASTM D1784, ASTM D2467, NSF Potable Water Certified
• Country of Origin: Domestic

Standard Information

• Brand: SPEARS
• Manufacturer Part Number: 54211168615