Spartan Scientific 6200-050-AAC6C-06 Solenoid Valve

Product Description

The SPARTAN SCIENTIFIC 6200-050-AAC6C-06 is a 2-way, 2-position normally closed solenoid valve designed for fluid control applications in HVAC, plumbing, and light industrial systems. The valve body is constructed from glass-filled nylon and uses a Viton seal, making it suitable for a range of compatible media. It operates on 24 volts AC and features a DIN spade connector for straightforward coil wiring. With a maximum working pressure of 250 psi and a Cv factor of 0.315, this valve delivers reliable shutoff performance in low-flow control circuits where a de-energized closed state is required.

This valve is suited for residential and light commercial HVAC hydronic systems, zone control applications, and plumbing fluid shutoff circuits where a 3/8 inch port size is appropriate. The normally closed configuration means flow is blocked when the coil is not energized, which is the standard fail-safe orientation for many zone valve and fluid isolation applications. Licensed HVAC technicians and plumbers commonly install this type of valve in zone manifolds, chilled water systems, and similar piping configurations.

Key Features

• 2-way, 2-position normally closed operation for fail-safe shutoff when de-energized
• 24 volt AC coil voltage compatible with standard low-voltage control circuits
• Glass-filled nylon body for lightweight, corrosion-resistant construction
• Viton seal material for compatibility with a broad range of fluid media
• DIN spade connector coil type for standardized field wiring
• No manual override — valve state is fully coil-dependent

Compatibility

Designed as an OEM-style replacement solenoid valve for 2-way normally closed fluid control applications using a 3/8 inch port in 24 volt AC low-voltage control systems.

Installation Notes

Installation should be performed by a licensed HVAC technician or plumber. De-energize the control circuit and shut off fluid supply and system pressure before removing or installing the valve. Verify that the pipe thread connections are sealed appropriately per IPC guidelines before returning the system to service. No manual override is present on this valve, so coil continuity should be confirmed during commissioning.