Southwire FLEXLTF12 Flex Liquidtight Cord Grip 1/2 Inch Npt

Product Description

The SOUTHWIRE FLEXLTF12 is a flex liquidtight cord grip designed for securing and protecting flexible conduit and cable at entry points on electrical enclosures, panels, and junction boxes. Sized at 1/2 inch NPT, it threads directly into standard NPT hubs and uses a 6/6 nylon construction rated for environmental conditions up to 70 degrees C. The black nylon body resists moisture, oils, and corrosive agents common in industrial and commercial wiring environments. Licensed electricians and electrical contractors install this fitting where a liquidtight, strain-relief connection is required at the termination point of flexible conduit runs.

This cord grip is suited for commercial and industrial electrical installations where flexible liquidtight conduit must be secured to enclosures, motor control centers, panel boards, and equipment junction boxes. The 1/2 inch NPT thread size covers a broad range of standard knockout and hub fittings. It is appropriate for use in both new construction and retrofit applications where code-compliant liquidtight terminations are required. The fitting carries UL and CSA certifications, making it acceptable on jobs requiring listed components under the National Electrical Code.

Key Features

• 1/2 inch NPT threaded connection for standard hub and knockout installations
• 6/6 nylon construction resists moisture, oils, and common industrial contaminants
• Rated for environmental conditions up to 70 degrees C
• UL listed under UL 514B and CSA certified for code-compliant installations
• Meets NEMA/ANSI FB-1, US Federal Specification A-A-50552, and military specifications W-F-406D, W-F-406E, W-F-408D, and W-S-610D
• Black color finish for standard field identification

Compatibility

Designed as an OEM-style replacement and standard-use fitting for flexible liquidtight conduit systems terminating at 1/2 inch NPT threaded hubs on electrical enclosures and equipment.

Installation Notes

Installation is performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits and lock out the panel before working at any enclosure entry point. Hand-tighten the NPT fitting into the hub, then snug with appropriate pliers or a strap wrench - do not over-torque nylon fittings. Verify the liquidtight seal is fully seated and that the conduit is properly secured before restoring power.