Southwire/coleman Cable 59773WD Wireless Wall Switch Remote

Product Description

The SOUTHWIRE/COLEMAN CABLE 59773WD is a wireless wall switch remote designed for indoor light control. It consists of a wall-mounted transmitter styled to resemble a standard decorator light switch and a paired receiver that plugs into an outlet. When mounted, the transmitter allows a connected light or lamp to be switched on or off from up to 80 feet away with a clear line of sight. Rated at 125 volts, 8 amps, and 625 watts for resistive tungsten loads, it suits table lamps, floor lamps, and similar plug-in lighting fixtures. The white finish blends with standard residential wall plates.

This remote switch is intended for residential indoor use where running a new switched circuit is not practical. Common applications include controlling a lamp in a living room, bedroom, or home office from a convenient wall location. The transmitter mounts at any accessible wall position without requiring hardwired connections. Note that physical obstacles such as walls and large furniture can reduce the effective operating range below the 80-foot maximum.

Key Features

• Wireless operation up to 80 feet with clear line of sight
• Wall-mounted transmitter styled as a decorator light switch
• Rated 125 volts, 8 amps, 625 watts for resistive tungsten loads
• White finish compatible with standard decorator wall plates
• No hardwiring required for transmitter installation
• Designed for indoor use with plug-in lighting fixtures

Compatibility

Designed for use with indoor plug-in lighting fixtures on standard 125-volt, 60 Hz residential circuits rated for resistive tungsten loads up to 625 watts.

Installation Notes

This device is installed by electricians or knowledgeable DIYers working on low-voltage wireless accessories. The receiver plugs directly into an existing outlet, and the wall-mounted transmitter is secured using standard hardware without a hardwired connection. Confirm that the connected load does not exceed the 8-amp or 625-watt rating before use. Follow all applicable NEC guidelines for plug-in accessory devices and ensure the outlet circuit is appropriately rated.