Southwire/coleman Cable 28827428 14/2 Nm-b Cable 100 Ft

Product Description

The SOUTHWIRE/COLEMAN CABLE 28827428 is a 100-foot roll of 14/2 non-metallic sheathed cable with ground, commonly known as NM-B or Romex-style cable. It features solid copper conductors rated for 90 degrees C and is designed for general-purpose branch circuit wiring in residential construction and renovation. The cable ships as a cut length on a single roll. Licensed electricians install this type of cable for lighting circuits, outlet circuits, and other standard 15-amp applications inside conditioned or dry interior spaces.

This 14/2 NM-B cable is suited for residential branch circuits in dry, indoor locations such as interior walls, ceilings, and floor assemblies. It is a standard choice for new construction rough-in wiring and panel-to-device runs where NM cable is permitted by the local authority having jurisdiction. The 100-foot cut length covers typical room-level circuit runs without splicing.

Key Features

• 14 AWG solid copper conductors for reliable conductivity on 15-amp circuits
• 90 degrees C temperature rating for safe operation within rated load conditions
• Includes ground conductor for code-compliant grounded circuit installations
• Non-metallic sheathing for lightweight, easy routing through framing cavities
• 100-foot cut length supplied as a single roll — unit of measure: RL

Compatibility

Designed as a standard NM-B replacement or new-installation cable for residential 15-amp, 120-volt branch circuits in dry indoor locations where non-metallic sheathed cable is permitted by applicable electrical codes.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit and verify zero voltage at the panel before pulling or terminating cable. NM-B cable is approved for dry, indoor locations only and must not be used in wet, damp, or direct-burial applications. Secure and protect the cable at required intervals per NEC stapling and support requirements.