Southwire 55039803 14/3 Seoow Outdoor Replacement Cord 600V

Product Description

The SOUTHWIRE 55039803 is a 14 AWG, 3-conductor SEOOW outdoor replacement cord rated at 600 volts. Built for demanding job-site and outdoor service environments, this flexible cord carries a UL 62 listing and meets CSA and NEC Article 400 requirements. The SEOOW designation indicates oil-resistant inner and outer jackets, making it suitable for use where petroleum-based fluids or outdoor exposure are a concern. The black jacket is UV-resistant and suited for both portable tool applications and stationary equipment hookups. Licensed electricians and industrial maintenance technicians are the primary installers. The cord is sold in 1-foot increments with a minimum cut length of 125 feet from a 250-foot total coil.

This cord is used in outdoor and industrial settings where a flexible, heavy-duty replacement or extension cord is needed. Typical applications include portable power tools, generators, temporary power drops, and equipment wiring on construction sites or in manufacturing facilities. The 3-conductor configuration supports grounded single-phase loads. Its ratings align with NEC Article 501.140 Class I Division 2 environments, meaning it is appropriate for certain classified hazardous locations as permitted by code. Residential and light commercial electricians also use SEOOW cord for outdoor appliance and HVAC equipment whips.

Key Features

• 600-volt rating suitable for a wide range of single-phase portable and stationary equipment
• SEOOW designation: oil-resistant inner and outer jacket for outdoor and industrial use
• 14 AWG, 3-conductor construction supports grounded loads
• Rated for NEC Article 501.140 Class I Division 2 hazardous locations
• Meets UL 62, CSA C22.2 No. 49, MSHA, RoHS, and Federal Specification JC580
• Sold in 1-foot increments; minimum cut length 125 feet from a 250-foot coil

Compatibility

Designed as a standard SEOOW-type flexible replacement cord for outdoor and industrial portable wiring applications governed by NEC Article 400. Suitable where UL 62-listed flexible cord is specified.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC Article 400 and any applicable local codes. De-energize all circuits before making terminations. SEOOW cord is flexible and intended for portable or semi-flexible service -- do not install it as permanent fixed wiring inside conduit. Inspect the jacket for cuts or abrasions before placing the cord in service, particularly in high-traffic or Class I Division 2 locations.