Southwire 41434 Power Outlet Strip 6 Outlets 15A 120V

Product Description

The SOUTHWIRE 41434 is a 6-outlet power strip rated for 15 amps at 120 volts, designed for standard indoor electrical applications. The strip measures 4.5 inches in length and ships with a 6-foot (72-inch) power cord, giving technicians and tradespeople enough reach for typical panel, workbench, or equipment-room installations. Built from white plastic with a NEMA 5-15R outlet configuration, it provides six independent circuits on a single strip. The manual trip reset and standard protection type make it a straightforward, no-frills power distribution solution. At 0.533 pounds, it is lightweight enough to mount via keyhole slots or leave free-hanging depending on the job site layout.

This outlet strip is suited for residential and light commercial indoor environments where additional receptacle capacity is needed at a single location. Common applications include electrical equipment rooms, HVAC control panel areas, service workbenches, and utility spaces where multiple low-draw devices need to be powered from a single 15-amp circuit. The free-hanging or keyhole mount options allow flexible positioning without dedicated hardware in most cases.

Key Features

• 6 outlets on a single strip with 6 independent NEMA 5-15R circuits
• Rated 15 amps at 120 volts for standard single-phase residential and light commercial loads
• 72-inch (6-foot) power cord for extended reach from wall outlet to point of use
• Dual mounting options: free-hanging or keyhole wall mount
• Manual trip reset for straightforward circuit restoration after an overload event
• Lightweight plastic construction at 0.533 pounds for easy repositioning

Compatibility

Designed as a standard NEMA 5-15R outlet strip for general indoor use on 15-amp, 120-volt circuits in residential and light commercial settings.

Installation Notes

Installation should be performed by a licensed electrician or qualified tradesperson in compliance with applicable NEC requirements. Always de-energize the circuit before connecting or repositioning the strip. Do not exceed the 15-amp circuit rating when calculating total connected load across all six outlets. For wall-mount installations, ensure keyhole fasteners are anchored to a surface rated to support the strip and connected device weight.