Southwire 07539 Temporary String Lights Metal Guard 100 Ft

Product Description

The SOUTHWIRE 07539 is a heavy-duty temporary string light set designed for job site lighting in construction, renovation, and industrial environments. The set runs 100 feet and carries power on a 12/3 AWG, three-conductor cord rated at 300 volts and 15 amps. Ten lamp positions are each protected by a metal guard, shielding bulbs from impact and debris. The cord is finished in OSHA Yellow for high visibility in active work zones. Each lamp socket accepts bulbs up to 150 watts maximum. Licensed electricians and general contractors typically deploy these sets for temporary power and lighting during rough-in and finishing phases.

These temporary string lights are suited for residential and commercial construction sites, renovation projects, utility tunnels, and any enclosed or semi-enclosed space requiring reliable temporary illumination. The 100-foot run length provides coverage across large open floor plates or along extended corridors. The OSHA Yellow cord color meets common job site visibility requirements, and the metal lamp guards reduce bulb breakage risk in high-traffic areas where tools and materials are frequently moved.

Key Features

• 100-foot cord length for extended job site coverage
• 12/3 AWG three-conductor construction rated at 300 volts and 15 amps
• Ten lamp positions with individual metal guards for impact protection
• Each socket rated for bulbs up to 150 watts maximum
• OSHA Yellow cord color for high-visibility identification on active work sites
• Heavy-duty build suited to repeated deployment and job site conditions

Compatibility

Designed as a general-purpose temporary string light set compatible with standard medium-base lamp sockets up to 150 watts per socket on a 15-amp, 120-volt circuit.

Installation Notes

Temporary string lights of this type are typically installed by licensed electricians or competent persons under applicable OSHA temporary power regulations and the National Electrical Code. Inspect the cord and lamp guards for damage before each use and replace any cracked guards or frayed insulation immediately. Do not exceed the 15-amp circuit rating or the 150-watt per-socket bulb limit. Keep the cord clear of standing water and sharp edges that could compromise the outer jacket.

Technical Specifications

• Conductor Size: 12/3 AWG
• Voltage Rating: 300 volts
• Amperage Rating: 15 amps
• Bulb Capacity: 150 watts maximum per socket
• Number of Lamps: 10
• Cord Length: 100 feet
• Cord Color: OSHA Yellow
• Guard Type: Metal
• Weight: 18 pounds
• Sold As: 1 per pack

Standard Information

• Brand: SOUTHWIRE
• Manufacturer Part Number: 07539