Skf 6206 2ZJEM Deep Groove Ball Bearing 62mm Od

Product Description

The SKF 6206 2ZJEM is a deep groove ball bearing designed for general-purpose rotating shaft applications across a wide range of industrial and mechanical systems. It features a 62 mm outside diameter, a round bore, and a double-shield design that retains grease lubrication while blocking contaminants. The steel cage and steel housing construction support continuous operation up to 12000 RPM. Rated ABEC-3, this bearing is suited for applications where moderate precision and reliable service life are required. Licensed HVAC technicians, equipment mechanics, and industrial maintenance professionals typically install this bearing during motor and blower shaft service.

This bearing is commonly used in electric motors, blower assemblies, pumps, gearboxes, fans, and light industrial machinery. Its single-row configuration handles radial loads effectively in compact shaft arrangements. The double-shield design eliminates the need for external grease fittings in most installations, making it a practical choice for sealed motor end bells, fan wheel shafts, and similar assemblies found in residential and commercial HVAC equipment as well as general mechanical applications.

Key Features

• 62 mm outside diameter with round bore for standard shaft fitment
• Double-shield design retains grease and blocks contamination without external seals
• Maximum rated speed of 12000 RPM for high-speed motor and blower use
• Steel cage and steel housing construction for durability under continuous load
• ABEC-3 precision rating for moderate-tolerance rotating applications
• Pre-greased single-row configuration, no snap ring included

Compatibility

Designed as an OEM-style replacement bearing for electric motors, blower assemblies, pumps, and fan shafts requiring a 6206-series deep groove ball bearing with a 62 mm outside diameter and double-shield configuration.

Installation Notes

Bearing replacement should be performed by a qualified mechanic or technician. Disconnect and lock out all power to the motor or equipment before beginning service. Use a proper bearing puller and press to remove and seat the bearing without applying force through the rolling elements. Do not hammer directly on the bearing race, as impact can damage the shield, cage, or raceways.