Skf 6206 2RSJEM Deep Groove Ball Bearing 62mm Od

Product Description

The SKF 6206 2RSJEM is a deep groove ball bearing designed for a wide range of rotating shaft applications in mechanical and industrial systems. It features a 62 mm outside diameter with a double-seal configuration that retains grease and blocks contaminants without requiring external sealing hardware. The bearing carries an ABEC-3 precision rating and supports shaft speeds up to 7,500 RPM. The single-row design handles both radial and moderate axial loads. Licensed HVAC technicians, millwrights, and mechanical service professionals install this bearing in blower assemblies, pump shafts, and motor end bells across residential and light commercial equipment.

This bearing is suited for single-row radial load applications where contamination protection and grease retention are priorities. The double-seal configuration makes it appropriate for enclosed or semi-exposed environments such as fan motor shafts, circulation pump housings, and belt-driven blower assemblies. The round bore and standard 6206 series dimensions allow drop-in replacement in any application built around that series geometry.

Key Features

• 62 mm outside diameter in the standard 6206 series envelope
• Double-seal design retains factory grease charge and excludes debris
• Rated to 7,500 RPM maximum shaft speed
• ABEC-3 precision class for general-duty rotating equipment
• Steel cage and steel housing material for durability in service
• Single-row construction handles radial and light axial loads

Compatibility

Designed as a direct-replacement bearing for any application built around the standard 6206 series geometry with a 62 mm outside diameter, round bore, and double-seal configuration.

Installation Notes

Bearing replacement is typically performed by licensed mechanical technicians or qualified HVAC and pump service professionals. De-energize and lock out all power to the equipment before disassembly. Press or drive the bearing squarely into the housing bore using a proper bearing driver or press - never strike the outer race to seat the inner race or vice versa. Consult applicable equipment service manuals for housing fit tolerances and shaft interface specifications before installation.