Skf 6010 2RSJEM Deep Groove Ball Bearing 80mm Double Seal

Product Description

The SKF 6010 2RSJEM is a single-row deep groove ball bearing designed for radial and light axial load applications. It features a double-sealed design packed with grease, keeping contaminants out and lubricant in without requiring re-greasing in normal service intervals. The 80 mm outside diameter and round bore profile fit standard housing and shaft configurations. Rated to ABEC-3 tolerances, it delivers consistent dimensional accuracy suitable for industrial and HVAC-adjacent rotating equipment. Licensed HVAC technicians, millwrights, and mechanical contractors install this bearing as an OEM-style replacement in motors, fans, and pump assemblies.

This bearing is suited for residential and light commercial equipment where a sealed, pre-lubricated radial bearing is required. Typical applications include electric motor rebuilds, blower wheel shaft assemblies, pump bearing housings, and belt-driven fan units. The grease-packed double-seal eliminates the need for external lubrication points in most standard duty cycles. Maximum rated speed is 5000 RPM, making it appropriate for low-to-mid-speed rotating machinery common in HVAC and plumbing equipment rooms.

Key Features

• Double-seal design retains grease lubrication and excludes contaminants
• 80 mm outside diameter with round bore for standard housing fit
• Single-row deep groove construction handles radial and moderate axial loads
• Maximum rated speed of 5000 RPM
• ABEC-3 tolerance rating for consistent dimensional accuracy
• Steel cage and steel housing material for durability in standard duty applications

Compatibility

Designed as an OEM-style replacement for equipment requiring a 6010 series single-row deep groove ball bearing with double-seal and grease lubrication.

Installation Notes

Installation should be performed by a qualified mechanic or technician familiar with bearing press fits. De-energize and lock out all equipment before removing the old bearing. Use a proper bearing press or sleeve driver to avoid applying force through the rolling elements during installation. Do not remove the seals or add supplemental grease unless the bearing design and application specifically require it.