Skf 2202 E-2RS1TN9 Self-aligning Ball Bearing 15mm Bore

Product Description

The SKF 2202 E-2RS1TN9 is a double-sealed, two-row self-aligning ball bearing designed to accommodate shaft misalignment in rotating machinery applications. The inner ring features a 15 mm bore diameter paired with a 35 mm outside diameter and a 14 mm overall width. Dynamic load capacity reaches 1,960 pounds, with a static load capacity of 459 pounds, making it suitable for moderate-to-heavy radial loading conditions. The glass fiber reinforced polyamide cage provides strength and weight efficiency. Licensed HVAC techs, millwrights, and mechanical contractors install this bearing type in fan assemblies, blower shafts, pump drives, and similar rotating equipment.

This bearing is appropriate for residential and light commercial mechanical systems where shaft deflection or housing misalignment is a known factor. Typical applications include belt-driven blower assemblies, circulator pumps, and small motor shaft support in HVAC and plumbing equipment. The double-seal configuration (2RS1) retains grease and resists contamination from dust and moisture, reducing maintenance intervals in field installations. Maximum rated speed is 14,000 RPM, supporting a broad range of motor and drive configurations.

Key Features

• Self-aligning design compensates for static and dynamic shaft misalignment
• Double seal (2RS1) retains lubricant and blocks particulate and moisture ingress
• Glass fiber reinforced polyamide (TN9) cage for dimensional stability and reduced weight
• 1,960 lb dynamic load capacity and 459 lb static load capacity
• 14,000 RPM maximum speed rating
• ABEC-1 tolerance class per ISO 492 and ISO 15 standards
• No snap ring or flange - direct drop-in for standard round-bore housings

Compatibility

Designed as an OEM-style replacement self-aligning ball bearing for round-bore applications requiring a 15 mm bore, 35 mm outside diameter, and 14 mm width in the Series 2202 E configuration.

Installation Notes

Installation is typically performed by licensed millwrights, HVAC technicians, or mechanical contractors. De-energize and lock out all power to the equipment before removing the worn bearing. Use a proper bearing press or installation sleeve to seat the bearing without applying force through the rolling elements. Consult the equipment manufacturer's service documentation and applicable ANSI or ISO standards for housing fit and shaft tolerance specifications.