Skf 202SST Deep Groove Ball Bearing 35mm Od Stainless

Product Description

The SKF 202SST is a single-row, open-style deep groove ball bearing built with a stainless steel housing. It carries a 35 mm outside diameter and an 11 mm width, making it a compact, corrosion-resistant option for applications where moisture, washdown, or chemical exposure is a concern. The bearing is rated to 24,000 RPM and carries a static load capacity of 3,250 Nm and a dynamic load capacity of 6,420 Nm. ABEC-1 dimensional tolerances apply. Maintenance and equipment technicians working in food processing, HVAC, pump assemblies, and similar environments typically specify this bearing when stainless construction is required.

This bearing is suited for light to moderate radial load applications in both residential and commercial equipment. Common installation scenarios include small electric motors, pump shafts, conveyor systems, and fan assemblies where a round bore and open configuration are appropriate. The open style allows for external lubrication access during service intervals. No snap ring is included with this bearing.

Key Features

• Stainless steel housing for corrosion and moisture resistance
• 35 mm outside diameter, 11 mm wide, round bore configuration
• Single-row deep groove design handles radial and light axial loads
• 24,000 RPM maximum speed rating
• Open style permits field lubrication and inspection
• ABEC-1 tolerance class for standard precision applications

Compatibility

Designed as an OEM-style replacement deep groove ball bearing for equipment requiring a 35 mm OD, 11 mm wide, round bore bearing with an open configuration and stainless steel construction.

Installation Notes

Installation should be performed by a qualified maintenance technician or millwright. Always de-energize and lock out the equipment before removing or seating the bearing. Use a proper bearing press or driver tool aligned with the ring being pressed to avoid loading balls during installation - never strike the bearing directly with a hammer. Verify shaft and housing tolerances before installation to ensure correct fit and prevent premature wear.