Sharp NP42LP Projector Replacement Lamp 370W Nec Compatible

Product Description

The SHARP NP42LP is a replacement projector lamp designed for large-venue NEC projectors in the PA series. Rated at 370 watts and delivering 9,000 lumens of light output, this lamp matches the performance of the original factory unit. Lamp life is rated at 4,000 hours in standard mode and extends to 5,000 hours when operating in economic mode. AV technicians and systems integrators install this lamp as a direct replacement when the original reaches end-of-life, restoring full brightness and color accuracy to the projection system. The NP42LP is manufactured by Sharp NEC Display Solutions Ltd.

This lamp is intended for professional large-venue and conference room projection installations using compatible NEC PA-series projectors. It is appropriate for both commercial AV environments and institutional settings such as auditoriums, training rooms, and boardrooms. The lamp fits multiple NEC projector models in the NP-PA series and is suited for installations where high lumen output and extended operational hours are required. Installers should verify the projector model and current lamp count before ordering to ensure correct fitment and to track warranty hours accurately.

Key Features

• 370-watt lamp output delivering 9,000 lumens, matching original factory light levels
• Rated lamp life of 4,000 hours in standard mode and 5,000 hours in economic mode
• Genuine original bulb construction from Sharp NEC Display Solutions Ltd.
• Limited warranty coverage of 1,000 hours or 6 months, whichever comes first
• Direct OEM-style replacement requiring no modifications to the projector housing

Compatibility

Compatible with the following NEC projectors: NP-PA653U, NP-PA653U-41ZL, NP-PA803U, NP-PA803U-41ZL, NP-PA853W, NP-PA853W-41ZL, NP-PA903X, and NP-PA903X-41ZL.

Installation Notes

Lamp replacement on large-venue projectors should be performed by a qualified AV technician or systems integrator. Always power down the projector completely and allow the lamp to cool for a minimum period as specified by the projector manufacturer before handling, as residual heat can cause burns and lamp damage. Handle the lamp module by its housing only - avoid contact with the bare bulb surface. After installation, reset the lamp hour counter in the projector menu per the projector manufacturer's documentation.