Sharkbite ur24985a Tee Stop 3/4x3/4x1/4 Push-to-connect

Product Description

The SHARKBITE ur24985a is a lead-free brass tee stop valve designed to tap into an existing 3/4-inch supply line and add a new 1/4-inch compression outlet without soldering or special tools. The quarter-turn full-port valve delivers straightforward on/off shutoff control of the downstream supply line. Push-to-connect inlets accept pipe or tubing with a 1.125-inch insertion depth, locking the fitting securely in place without crimping or gluing. The compact form factor is well suited for installs in confined spaces such as under-sink cabinets and wall chases. Licensed plumbers and experienced service techs are the primary installers for this type of fitting.

The ur24985a is used in residential and light commercial plumbing applications where a new fixture line must be added to an existing 3/4-inch supply without cutting and reconfiguring the run. Typical scenarios include adding a refrigerator ice-maker line, water filter feed, or similar 1/4-inch compression-outlet device to a live 3/4-inch copper, PEX, CPVC, PE-RT, or CTS water supply line. The compression outlet handles the new branch connection to small-diameter tubing.

Key Features

• Push-to-connect inlets on both 3/4-inch ports — no solder, no clamps, no primer required
• Quarter-turn full-port brass valve for fast, positive shutoff of the 1/4-inch outlet
• Lead-free brass construction meets NSF/ANSI drinking water material requirements
• 1.125-inch insertion depth locks tubing securely against pull-out
• Compatible with multiple tubing types: copper, PEX, CPVC, PE-RT, and CTS
• Compact design allows work in tight, restricted spaces

Compatibility

Compatible with 3/4-inch copper, PEX, CPVC, PE-RT, and CTS tubing on the push-fit inlets. The outlet uses a 1/4-inch compression connection. Fitting system compatibility is push-fit only.

Installation Notes

Installation is performed by a licensed plumber or qualified service technician. Shut off the main water supply and relieve line pressure before cutting into the existing pipe. Ensure pipe ends are cut squarely, deburred, and cleaned to the full insertion depth of 1.125 inches before seating tubing into the push-fit ports. Verify local plumbing code acceptance of push-to-connect fittings per IPC or applicable jurisdiction before installation.

Technical Specifications

• Inlet Size: 3/4 inches
• Outlet Size: 1/4 inches
• Overall Size: 3/4 x 3/4 x 1/4 inches
• Insertion Depth: 1.125 inches
• Fitting System: Push Fit
• Tubing Compatibility: Copper, PEX, CPVC, PE-RT, CTS
• Lead Free: Yes
• Application: Plumbing

Standard Information

• Brand: SHARKBITE
• Manufacturer Part Number: ur24985a