Sharkbite U860W20 Pex-b Pipe 1/2 in 20 Ft White

Product Description

The SHARKBITE U860W20 is a white PEX-B flexible tubing coil designed for residential and light commercial potable water distribution. With a 1/2-inch inside diameter and 20-foot length, this cross-linked polyethylene pipe installs faster than rigid copper or CPVC because it bends around obstacles without additional fittings. It carries an 80 psi pressure rating and handles temperatures from 33 degrees F to 200 degrees F, making it suitable for both hot and cold supply lines. Licensed plumbers and pipefitters specify PEX-B for its balance of flexibility, chemical resistance, and proven long-term performance in pressurized water systems.

This tubing is rated for hot and cold potable water distribution, fire protection systems, and municipal water service lines. Its freeze-resistant construction allows the pipe to expand slightly if water inside freezes, then contract when thawed, reducing the risk of burst pipe events common in unheated spaces or exterior wall chases. The 20-foot coil length covers typical residential rough-in runs from a manifold to individual fixtures without splices, cutting the number of connection points and the associated labor and leak risk.

Key Features

• PEX-B construction rated to 80 psi for reliable pressurized water service
• Temperature range of 33 degrees F to 200 degrees F supports both hot and cold lines
• Freeze-resistant: pipe expands when frozen and contracts when thawed, reducing burst risk
• Flexible tubing reduces required fittings, lowering install time and potential leak points
• White color coding for use on hot or cold lines per installer preference or code requirement
• Approved for potable water, fire protection, and municipal water service applications

Compatibility

Designed for use with standard 1/2-inch PEX fittings and compatible push-to-connect, crimp, clamp, and expansion-style PEX fitting systems rated for PEX-B tubing in potable water, fire protection, and municipal water service applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code (IPC). Shut off the main water supply and relieve system pressure before cutting into any existing line. Use a dedicated PEX pipe cutter to produce a clean, square cut end - do not use a hacksaw, as burrs will compromise the fitting seal. Support spacing and bend radius minimums specified by the fitting manufacturer and local code must be observed throughout the rough-in.