Sgs Pro 73053 Diamond Pattern Router Bit Drill Point

Product Description

The SGS PRO 73053 is a diamond pattern router bit with a drill point end type, designed for use in CNC machine applications. It features a cutter diameter of 0.313 inches and a matching shank diameter of 0.313 inches, with an overall length of 2.5 inches and a length of cut of 1 inch. The bright, uncoated finish suits operations where coating is not required or where base material compatibility is a consideration. This bit is installed and operated by machinists and CNC technicians working in production or fabrication environments.

This router bit is intended for CNC machine use where a drill point entry and diamond pattern cutting geometry are required. The drill point tip allows the bit to plunge directly into the workpiece without a pre-drilled pilot hole, making it well suited for pocketing and interpolation operations. The 1-inch length of cut provides adequate reach for most standard-depth routing passes in typical CNC setups.

Key Features

• Drill point end type allows direct plunge entry without a pilot hole
• Diamond pattern cutting geometry for CNC routing applications
• 0.313 inch cutter diameter with matching 0.313 inch shank diameter
• 1 inch length of cut suitable for standard-depth passes
• 2.5 inch overall length for compatibility with standard CNC toolholders
• Bright, uncoated finish - no coating to interfere with material or process requirements

Compatibility

Designed for use in CNC machines accepting a 0.313 inch shank diameter router bit with a drill point end type.

Installation Notes

This bit is installed by a qualified CNC machinist or tooling technician. Always power down and lock out the CNC machine before changing tooling. Verify shank diameter matches the collet or toolholder specification before securing. Inspect the bit for wear or damage before each use and do not exceed the machine manufacturer's recommended feed and speed parameters for the material being cut.