Sgs 44562 Square End Mill 0.315 in 2 Flute Solid Carbide Series 47ML

Product Description

The SGS 44562 is a solid carbide square end mill designed for precision milling of non-ferrous metals. Part of the SGS Series 47ML long-reach lineup, this tool features a 0.315-inch mill diameter, a 0.4724-inch length of cut, and a 35-degree helix angle that promotes efficient chip evacuation and smooth cutting action. The micrograin carbide construction delivers edge retention and rigidity suited to tight-tolerance work. With a straight cylindrical shank and right-hand cut geometry, this end mill fits standard collet and toolholder setups found in CNC machining centers and manual mills. It is a single-end, center-cutting tool, allowing plunge entry in addition to peripheral and slot milling operations.

This end mill is intended for milling non-ferrous metals such as aluminum, brass, copper, and similar materials. The bright uncoated finish and 35-degree spiral flute geometry are well matched to these workpiece materials, where sharp, polished cutting edges reduce built-up edge and improve surface finish. The long-series configuration, with a reach length of 2.126 inches and a neck length of 1.6535 inches, makes it suitable for deep-pocket work and applications where standard-length tools cannot reach the cutting zone. Machinists in job shops, production facilities, and toolrooms will find this tool appropriate for slotting, profiling, and contouring operations on non-ferrous workpieces.

Key Features

• 0.315-inch mill diameter with micrograin solid carbide construction for edge retention
• 35-degree helix spiral flute promotes chip evacuation in non-ferrous materials
• Long-series reach of 2.126 inches for deep-pocket and extended-reach applications
• Center-cutting design allows direct plunge entry without pre-drilled lead holes
• Bright uncoated finish suited to aluminum, brass, copper, and similar non-ferrous metals
• Right-hand cut with right-hand flute direction for use in standard spindle rotation

Compatibility

Designed for use in standard straight-bore collets and toolholders accepting a 0.315-inch cylindrical shank. Intended for non-ferrous metal milling applications in CNC machining centers and manual mills running right-hand spindle rotation.

Installation Notes

Installation and tool changes should be performed with the machine spindle fully stopped and the control in a safe state per shop lockout procedures. Seat the shank fully into the collet or toolholder and torque the retention mechanism to the toolholder manufacturer specification. Verify runout after seating, as micrograin carbide tools are sensitive to collet concentricity. Inspect the cutting edges before use and do not run a chipped or damaged end mill.