Sgs 44513 Square End Mill 0.1969 in 2 Flute Solid Carbide

Product Description

The SGS 44513 is a solid carbide square end mill designed for precision milling of non-ferrous metals. It features a 0.1969-inch (5.00 mm) mill diameter and a 0.5118-inch (13.00 mm) length of cut, making it suited for finish and detail work in aluminum, brass, copper, and similar materials. The two-flute, spiral geometry with a 45-degree helix angle promotes efficient chip evacuation and smooth cutting action. The uncoated carbide construction maintains sharp edges and dimensional accuracy in non-ferrous applications. This tool is installed and operated by machinists and CNC programmers working in production and job-shop environments.

The SGS 44513 is built for use in CNC machining centers and manual mills where tight tolerances and clean surface finishes are required on non-ferrous workpieces. The regular-length configuration and 6.00 mm (0.2362-inch) Weldon flat shank provide secure tool holding in standard collet and end mill holders. The centercutting design allows plunge milling in addition to standard peripheral and slot cutting operations. This end mill is suited for light slotting, profiling, and contouring passes in aluminum and other non-ferrous materials.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous milling
• 2-flute spiral design with 45-degree helix angle for effective chip evacuation
• Centercutting geometry enables plunge, slot, and contour operations
• Right-hand cut and right-hand flute orientation for standard CNC and manual mill spindles
• Weldon flat shank for positive grip in end mill holders and collet chucks
• Uncoated finish maintains sharp cutting edges on non-ferrous and soft materials

Compatibility

Designed for use in standard end mill holders and collet systems accepting a 6.00 mm shank diameter. Intended for milling non-ferrous metals including aluminum, brass, and copper. Part of the SGS Series 44 end mill line.

Installation Notes

Installation and setup should be performed by a qualified machinist or CNC operator. Secure the Weldon flat shank firmly in the tool holder using the set screw against the flat to prevent pull-out under load. Verify runout at the spindle before initiating cuts. Always follow machine tool manufacturer guidelines for spindle speed, feed rate, and depth of cut for the specific workpiece material.