Sgs 36632 Corner Radius End Mill 1/2 in 9 Flute Solid Carbide

Product Description

The SGS 36632 is a solid carbide corner radius end mill designed for high-performance finishing operations in demanding machining environments. It features a 1/2 inch diameter, a 1-1/4 inch length of cut, and a 0.12 inch corner radius, with 9 flutes arranged in a super close pitch configuration for a superior surface finish. The TX (AlTiN-based) coating provides thermal resistance and extended tool life when cutting ferrous and high-hardness workpiece materials. This end mill is intended for use with standard end mill holders on CNC machining centers operated by skilled machinists and toolroom professionals.

The 36632 is built for finishing passes on steel, stainless steel, cast iron, superalloys, titanium, and hard materials. Its single-end, right-hand cutting, right-hand flute configuration suits vertical and horizontal milling operations where consistent corner geometry and tight tolerances are required. The 3 inch overall length and 1/2 inch straight-cylindrical shank make it compatible with standard end mill holders in both production and toolroom settings. It is not center-cutting, so it is intended for side milling and profiling rather than plunge entry.

Key Features

• 9-flute super close pitch design optimized for finishing on ferrous and hard materials
• 0.12 inch corner radius with a tolerance of -0.0020 to 0.0000 inches for consistent edge geometry
• TX coating (AlTiN-based) for high-temperature resistance and reduced built-up edge
• Micrograin solid carbide substrate for rigidity and wear resistance
• Right-hand cut, right-hand helical flutes with medium helix angle for smooth chip flow
• Series 66CR single-end configuration; not center-cutting

Compatibility

Designed for use with end mill holders. Primary workpiece materials include steel, stainless steel, cast iron, superalloys, and titanium. Secondary workpiece material is hard material.

Installation Notes

Installation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine locked out per shop safety procedures. Seat the straight-cylindrical shank fully in the end mill holder and torque the retention hardware according to the holder manufacturer specifications. Verify runout with a dial indicator before beginning the cut. Do not use this tool for plunge entry as it is a non-center-cutting design.