Senco K528APBXN Framing Nails 0.131x3.25in 34 Degree 2500 Count

Product Description

The SENCO FASTENING SYSTEMS K528APBXN is a box of 2500 Pro-Head framing nails designed for structural wood framing and sheathing applications. Each nail measures 0.131 inches in diameter by 3.25 inches in length and is configured at a 34-degree collation angle, making it compatible with standard 34-degree framing nailers. The diamond point tip drives cleanly through lumber with reduced splitting. A bright finish provides a clean, uncoated surface suited for interior framing where corrosion resistance is not a primary requirement. Carpenters, framers, and general contractors rely on this format for high-volume production framing work.

These nails are suited for residential and light commercial wood framing, wall plates, headers, rim joists, and similar structural connections where a 3.25-inch penetration depth meets code-required fastening schedules. The 34-degree paper-tape collation is a widely used format across a range of pneumatic framing nailers. The 2500-count package is sized for sustained production use on framing crews where minimizing reload stops matters.

Key Features

• 0.131-inch shank diameter x 3.25-inch length for structural framing capacity
• 34-degree collation angle for compatibility with standard 34-degree pneumatic framing nailers
• Diamond point tip for consistent, low-split entry into framing lumber
• Bright finish surface for interior framing applications
• Pro-Head design for reliable feed and reduced jamming in production nailers
• 2500-count box for extended production use without frequent reloading

Compatibility

Designed for use with pneumatic framing nailers that accept 34-degree paper-tape collated nails with a 0.131-inch shank diameter.

Installation Notes

These nails are installed using a pneumatic framing nailer set to the appropriate drive pressure for the lumber species and sheathing thickness being fastened. Consult local building codes and fastening schedules to confirm nail size and spacing requirements for structural connections. Always disconnect the nailer from the air supply before clearing jams or performing maintenance. Bright-finish nails are not recommended for exterior or high-moisture environments where corrosion resistance is required.