Scientific Cutting Tools EN250-30 Engraving Cutter

Product Description

The SCIENTIFIC CUTTING TOOLS EN250-30 is a solid carbide engraving cutter designed for precision material removal in engraving, marking, and detail-cutting applications. Built with a conical point geometry and a 30-degree included angle, it produces sharp, clean lines at a tip diameter of 0.009 inches. The submicron carbide grade provides the hardness and edge retention needed for fine-detail work on metals, plastics, and composites. The uncoated finish makes it well-suited for applications where coating adhesion or material compatibility is a concern. Machinists, toolmakers, and CNC programmers are the primary installers and operators of this tool.

This engraving cutter is used in CNC machining centers and manual engraving setups for fine-line work on flat or contoured surfaces. Typical applications include part marking, logo engraving, serial number stamping, and decorative engraving on hardened or soft materials. The 1/4-inch shank diameter fits standard collet systems and tool holders used in most machining environments. The 0.447-inch length of cut gives adequate depth capacity for most engraving tasks without excessive tool deflection.

Key Features

• 30-degree included angle conical point for precise, sharp line definition
• 0.009-inch tip diameter enables extremely fine detail work
• Submicron solid carbide construction for hardness and wear resistance
• Uncoated finish suitable for a broad range of workpiece materials
• Right-hand cutting direction compatible with standard CNC spindle rotation
• 1/4-inch shank fits widely available collets and tool holders

Compatibility

Designed as an OEM-style replacement or direct-use engraving cutter for CNC machining centers and engraving machines equipped with 1/4-inch collet or tool holder systems.

Installation Notes

Installation and setup should be performed by a qualified machinist or CNC technician. Ensure the spindle is fully stopped and machine power is off before inserting or removing the cutter from the collet. Verify collet size matches the 1/4-inch shank diameter before tightening. Handle carbide tooling with care to avoid chipping the tip, as solid carbide is brittle under impact or improper clamping force.