Schneider Electric LC1K0610U7 Iec Contactor 3 Pole 6A

Product Description

The SCHNEIDER ELECTRIC LC1K0610U7 is a 3-pole, non-reversible IEC contactor rated for 6 amps at 440V AC, controlled by a 230 to 240V AC coil operating at 50/60 Hz. It is designed for switching and controlling three-phase motor loads and resistive circuits in light industrial and commercial electrical systems. The contactor features a normally open (NO) auxiliary contact configuration and compact dimensions suited for panel and enclosure mounting. Licensed electricians and industrial control technicians install this device as part of motor starter assemblies, control panels, and automated switching circuits.

This contactor is well suited for light-duty three-phase motor control applications in commercial HVAC equipment, pump systems, conveyor controls, and general industrial automation. Its non-reversible design makes it appropriate for single-direction motor drive circuits. The 230 to 240V AC coil voltage aligns with standard single-phase control circuit voltages common in European and international IEC-standard installations, as well as compatible North American panel configurations operating at equivalent voltages.

Key Features

• 3-pole configuration for three-phase load switching
• 6A rating at 440V AC for light motor and resistive load applications
• 230 to 240V AC coil at 50/60 Hz for broad control circuit compatibility
• Normally open (NO) auxiliary contact configuration
• Non-reversible action for single-direction motor control circuits
• Compliant with IEC 60947, UL Listed, CSA, RoHS, VDE 0660, BS 5424, and NF C 63-110

Compatibility

Designed as an OEM-style replacement or new-installation IEC contactor for 3-pole, non-reversible motor control and switching applications requiring a 230 to 240V AC coil at 50/60 Hz.

Installation Notes

Installation should be performed by a qualified electrician in accordance with NEC and applicable IEC 60947 standards. De-energize and lock out the control panel before removing or installing the contactor. Verify coil voltage matches the control circuit supply before energizing. Ensure proper wire termination torque per panel and enclosure manufacturer guidelines and confirm all pole connections are fully seated before returning the circuit to service.