Schlage ND80TDEU Rho 626 Electrified Storeroom Lock

Product Description

The SCHLAGE ND80TDEU RHO 626 is a Grade 1 electrified cylindrical lock configured for storeroom function. It operates on 12 or 24 volts DC and is wired fail secure, meaning the latch remains locked if power is interrupted. The lock features the Rhodes lever style in a satin chrome (626) finish and ships with a Schlage Full Size Interchangeable Core (FSIC) prep installed with a construction core. It is UL Listed for both fire and electrical single-point locking on labeled doors, making it suitable for high-security and fire-rated door applications. Licensed electricians and commercial door hardware specialists are the primary trades involved in its installation.

This lock is designed for commercial and institutional applications where remote access control is required at a storeroom entrance. In storeroom function, the outside lever is always locked and can only be released by electrical signal or key; the inside lever remains free-turning at all times. The ND80TDEU integrates into wired access control systems or operates independently with a remote access switch. The onboard RX switch supports normally open or normally closed wiring configurations, giving integrators flexibility in how the lock reports door position or responds to control signals. It is part of the ND Series, which covers the ND10, ND12, ND80, and ND96 families with RX feature availability.

Key Features

• Grade 1 cylindrical lock construction for heavy-duty commercial use
• Fail secure operation - latch stays locked during power loss
• 12 or 24 volts DC input for flexible power supply compatibility
• RX switch configurable for normally open or normally closed applications
• UL Listed for fire and electrical single-point locking on labeled doors
• FSIC prep with construction core included - field-replaceable with Schlage FSIC cores
• BAA (Buy American Act) qualified

Compatibility

Designed for use in wired access control systems or independent remote-switch configurations on commercial doors. RX feature is available across the ND10, ND12, ND80, and ND96 lock families. FSIC prep accepts Schlage full size interchangeable cores.

Installation Notes

Installation should be performed by a qualified commercial door hardware technician or licensed electrician familiar with access control wiring. Disconnect and lock out all power to the access control system before making electrical connections. Verify door prep dimensions and backset before installation, and confirm the control panel or power supply output matches the 12 or 24 volt DC requirement. Follow applicable local building codes and NFPA 80 requirements when installing on fire-rated door assemblies.