Schlage ND80PDEU Rho 606 Rx Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80PDEU RHO 606 RX is a Grade 1 electrified cylindrical lock configured for storeroom function, designed for commercial access control applications. Operating on 12/24 VDC, the lock is fail-secure by default, meaning the latch remains locked when power is lost. It features a 2-3/4 inch backset, a Rhodes lever trim, and a Satin Brass (606) finish. Request-to-Exit (RX) output allows the lock to signal an access control panel when the lever is depressed from the secure side. Licensed locksmiths, security integrators, and commercial door hardware professionals are the primary installers of this hardware.

This lock is suited for commercial and institutional interior doors where controlled entry and egress monitoring are required. Storeroom function keeps the outside lever locked at all times, requiring credential or remote release for entry, while the inside lever provides free egress. The Request-to-Exit feature makes it compatible with access control systems that monitor door activity. The Rhodes lever and Satin Brass finish suit office, healthcare, and institutional environments where durable Grade 1 hardware with a professional appearance is specified.

Key Features

• Grade 1 commercial-duty cylindrical lock construction
• Storeroom function: outside lever always locked, free egress from inside
• Dual-voltage operation at 12 VDC or 24 VDC
• Fail-secure design holds the latch locked on power loss
• Request-to-Exit (RX) output for access control panel integration
• Rhodes lever trim in Satin Brass (606) finish
• 2-3/4 inch backset for standard commercial door prep

Compatibility

Designed as an OEM-style electrified cylindrical lock for commercial doors prepared to ANSI/BHMA standard cylindrical lock bore patterns with a 2-3/4 inch backset.

Installation Notes

Installation should be performed by a licensed locksmith or qualified security integrator familiar with ANSI/BHMA Grade 1 cylindrical hardware and low-voltage access control wiring. Power must be disconnected from the access control panel before making electrical connections to the lock. Wiring must comply with NEC requirements for low-voltage control circuits. Verify door and frame preparation match the required cylindrical bore and strike dimensions before installation.