Schlage ND80LDEU Spa 626 Rx Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80LDEU SPA 626 RX is a Grade 1 electrified cylindrical lock configured for storeroom function with fail-secure operation. It accepts 12-24 volts DC, making it compatible with a wide range of access control power supplies. The Sparta lever trim and satin chrome (626) finish give it a clean, professional appearance suited for commercial door hardware applications. This lock ships less cylinder, meaning a compatible core must be sourced and installed separately. It is intended for installation by a licensed locksmith or qualified door hardware technician on commercial interior or vestibule doors.

This lock is designed for storeroom or security applications where the outside lever is always locked and can only be released by an electrical signal from an access control system. The built-in Request to Exit (RX) function signals the access control panel when the inside lever is used to exit, supporting proper door monitoring. The 2-3/4 inch backset fits standard commercial door preps. It is commonly installed on server rooms, storage areas, and controlled-access offices in commercial and institutional buildings.

Key Features

• Grade 1 heavy-duty cylindrical lock construction for commercial applications
• Storeroom function: outside lever locked at all times, electrically released for entry
• Fail-secure operation: lock remains locked upon power loss, maintaining security
• Dual-voltage input of 12-24 volts DC for flexibility with access control power supplies
• Integrated Request to Exit (RX) output for access control panel integration
• Ships less cylinder: requires separate compatible core for installation
• Sparta lever trim in satin chrome (626) finish for a professional commercial appearance

Compatibility

Designed as an OEM-style electrified cylindrical lock for commercial access control applications requiring a storeroom-function, fail-secure door hardware solution with Request to Exit capability.

Installation Notes

Installation should be performed by a licensed locksmith or qualified commercial door hardware technician familiar with access control wiring. Disconnect and lock out all power to the access control system before wiring the lock. This unit ships less cylinder, so a compatible key core must be procured and installed before the lock is put into service. Verify door preparation, backset, and handing before installation to ensure proper fit and function.