Schlage ND80LDEU Rho 613 Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80LDEU RHO 613 is a Grade 1 electrified cylindrical lock configured for storeroom function with fail secure operation. It accepts 12 to 24 volts DC input, making it compatible with a wide range of access control power supplies. The lock features the Rhodes lever trim and is supplied less cylinder, requiring a separate core installation. A 2.75-inch backset and Oil Rubbed Bronze finish (613) are standard. This hardware is specified for commercial and light industrial doors where electronic access control integration is required alongside mechanical Grade 1 durability.

This lock is suited for commercial interior or perimeter doors where storeroom function is required - the outside lever is always locked and can be released only by electrical signal or a key, while the inside lever remains free for egress. Typical installations include server rooms, pharmacies, stock rooms, and secure office entries. An electrified cylindrical lock of this type is commonly specified on hollow metal or solid wood commercial doors in access-controlled building systems. It is installed by a licensed locksmith or commercial door hardware technician as part of a broader access control deployment.

Key Features

• Grade 1 ANSI/BHMA commercial duty cylindrical lock body
• Storeroom function: outside lever locked at all times, released by electric signal or key, inside lever always free for egress
• Fail secure operation: lock remains locked on power loss
• 12 to 24 volts DC operating range accommodates most access control power supplies
• Rhodes (RHO) lever trim in Oil Rubbed Bronze (613) finish
• Less cylinder configuration allows installer to specify and install a separate core
• 2.75-inch backset for standard commercial door prep

Compatibility

Designed as an OEM-style replacement or new-installation electrified cylindrical lock for commercial doors with standard cylindrical lock prep and 2.75-inch backset. No specific compatible model or system data was provided in the product input.

Installation Notes

Installation should be performed by a qualified locksmith or commercial door hardware technician familiar with electrified hardware. Disconnect and lock out all power to the access control system before wiring the lock. The less-cylinder configuration requires a compatible key-in-lever core to be sourced and installed separately before the lock is put into service. Follow all applicable building codes and the door manufacturer's reinforcement requirements when mounting Grade 1 hardware on the door edge.