Schlage ND80LDEL Rho 626 Rx Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80LDEL RHO 626 RX is a Grade 1 electrified cylindrical lock designed for storeroom function in commercial access control applications. It operates on 12-24 volts DC and is configured fail safe, meaning the latch retracts and the door is free to open when power is lost. The lock features a Rhodes lever trim, a 2-3/4 inch backset, and a satin chrome (626) finish. It ships less cylinder, so a compatible mortise or rim cylinder must be sourced and installed separately. A request-to-exit (RX) output is integrated for use with access control panels.

This lock is intended for commercial interior or exterior doors where electronic access control is required without a traditional knob or lever that can be turned from the outside without credential. Storeroom function means the outside lever is always locked and can only be retracted by electrical signal or a key, while the inside lever always allows free egress. It is well suited for server rooms, pharmacies, supply closets, and similar controlled-access spaces in commercial and institutional buildings.

Key Features

• Grade 1 commercial-duty cylindrical lock body rated for heavy-traffic applications
• Fail safe configuration releases the latch on power loss, supporting life-safety code requirements
• Dual voltage input of 12-24 volts DC for flexible power supply integration
• Integrated request-to-exit output simplifies wiring to access control panels
• Rhodes lever trim in satin chrome (626) finish for a clean, professional appearance
• Ships less cylinder, allowing the installer to specify a matching cylinder separately

Compatibility

Designed as an OEM-style electrified cylindrical lock for commercial doors requiring storeroom function with electronic access control integration. Confirm door prep, backset, and cylinder type before ordering.

Installation Notes

Installation should be performed by a licensed locksmith or credentialed access control technician familiar with ANSI cylindrical lock prep standards. Disconnect and lock out all power to the access control system before wiring the lock. Verify that the door frame and power transfer hinge or door loop are compatible with the lock voltage and current draw before energizing. Local AHJ requirements and applicable building and fire codes should be consulted to confirm fail safe configuration is permitted for the intended opening.