Schlage ND80JDEL Lat 626 Electrified Cylindrical Lock

Product Description

The SCHLAGE ND80JDEL LAT 626 is a Grade 1 electrified cylindrical lock designed for storeroom function in commercial access control applications. It operates on 12-24 volts DC and is configured fail safe, meaning the lock releases when power is lost. The Latitude lever trim and satin chrome plated finish give it a clean, professional appearance suited to commercial interiors. This lock ships without a full-size interchangeable core, allowing the installer to supply the appropriate core for the keying system already in use on the project. Licensed locksmiths, commercial door hardware specialists, and security integrators are the primary installers.

This lock is intended for commercial storeroom applications where electric release control is required. A storeroom function means the outside lever is always locked and can only be released by electrical signal or key, while the inside lever always allows free egress. The 2.75-inch backset fits standard commercial door preparations. The fail safe configuration is typically specified for life-safety compliance in egress paths, ensuring the door unlocks automatically during a power failure or fire alarm system signal.

Key Features

• Grade 1 commercial-duty cylindrical lock construction
• Storeroom function: outside lever locked at all times, released by electrical signal or key
• Fail safe operation: lock releases upon loss of power for life-safety egress compliance
• 12-24 volt DC input voltage for flexible power supply compatibility
• 2.75-inch backset fits standard commercial door preparations
• Less full-size interchangeable core (FSIC) - installer supplies the core to match existing keying system
• Latitude lever trim in satin chrome (626) finish

Compatibility

Designed as an OEM-style replacement or new-install electrified cylindrical lock for commercial doors requiring Grade 1 storeroom function with fail safe electric release and a 2.75-inch backset preparation.

Installation Notes

Installation should be performed by a licensed locksmith or qualified commercial door hardware technician familiar with electrified hardware and low-voltage wiring. Disconnect all power to the access control system before wiring the lock. Low-voltage wiring must comply with applicable NEC requirements for Class 2 circuits. Confirm the door preparation, backset, and core selection before beginning installation, as the unit ships without an interchangeable core.